You probably need a switchboard upgrade if your board still has ceramic fuses, has no safety switches, trips often, feels warm, smells like burning, or has no room for new circuits like air conditioning, solar or an EV charger. Queensland law also requires safety switches on power point circuits when a home is sold or rented, which forces many older boards to be upgraded.
What are the signs a switchboard needs upgrading?
Open the meter box and have a look. These are the common signs:
- Ceramic fuses. White plug-in fuse holders with fuse wire inside. They protect the wiring, not people.
- No safety switches. Safety switches have a 'T' or 'Test' button. If nothing on your board has one, you have no shock protection.
- Safety switches on some circuits only. Common in homes built before 2000, where only the power points were covered.
- Breakers or safety switches tripping often with no obvious faulty appliance.
- Heat, buzzing or a burning smell from the board, or scorch marks around a fuse or breaker.
- Lights dimming when the air conditioner, oven or kettle kicks in.
- No spare space for a new circuit.
- An old board in an older home. Switchboards in older homes can contain asbestos, which changes how the job is done.
Heat, burning smells and scorch marks are urgent. Keep away from the board and call a licensed electrician.
Is it a legal requirement to upgrade?
There’s no law forcing every old board out. But Queensland does require safety switches in several situations, according to the Electrical Safety Office:
- Buying a home. If it has no safety switch on the power point circuits, the buyer must install one within 90 days of the transfer.
- Selling a home. The seller must declare whether a safety switch is installed on the contract and Form 24.
- Renting a home out. The landlord must have safety switches on all power point circuits within 90 days after the tenancy starts.
- New work. When new circuits are added, safety switch protection has to cover the circuits involved.
On a ceramic fuse board, there’s often no room or no sensible way to add a safety switch. That’s when the whole board gets replaced.
Do I need an upgrade to add air conditioning, solar or an EV charger?
Often, yes. Each of these needs its own circuit and protection devices on the board. The Electrical Safety Office notes that solar alone may need extra isolators, circuit breakers and safety switches, and in some cases the board needs upgrading to fit them.
If your board is full, or it’s an old fuse board, the new circuit can’t go in properly until the board is sorted. It’s worth getting the board looked at before you sign up for the air con or EV charger, so the full price is clear up front.
Why does my safety switch keep tripping?
A safety switch trips when it detects current leaking to earth. That’s its job. The cause is usually a faulty appliance, water getting into an outdoor point or light, or damaged wiring. Unplug everything on that circuit and see if it resets.
If it trips with nothing plugged in, or won’t reset, the Electrical Safety Office says that may mean a fault on the circuit that needs a licensed electrician. A tripping safety switch is a warning, not a reason to remove it. Sometimes the fault is the old board itself, which is where an upgrade comes in.
Can I add a safety switch instead of a full upgrade?
Sometimes. If the board is in good shape, has space, and already uses circuit breakers, an electrician can often add safety switches to the existing board. If it’s a ceramic fuse board, a crowded board, or has damage or asbestos, replacing it is usually the better job.
Either way, only a licensed electrician can install a safety switch. The Electrical Safety Office is blunt: DIY electrical work is dangerous and illegal.
How do I find out for sure?
Get it checked. Fins Up Electrical looks at the board, tests the existing safety switches, and tells you straight whether it needs adding to or replacing. You get a free fixed quote before any work starts. We’re open 24 hours Monday to Saturday, and Andrew holds electrical contractor licence 91921. See our switchboard upgrades page.
Want this sorted? Switchboard upgrades from Fins Up.
Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.
Common questions
How do I know if I have a safety switch?
Look for a device on your switchboard with a 'T' or 'Test' button. If nothing has a test button, the devices are probably circuit breakers or fuses, not safety switches.
Is it illegal to have ceramic fuses in QLD?
Not on their own. But a home with no safety switch on its power point circuits must have one fitted within 90 days of a sale, or within 90 days of a new tenancy starting.
How often should I test my safety switches?
The Electrical Safety Office recommends pressing the test button every three months.