Fins Up Electrical

Downlight installation

Licensed electrician based in Scarborough, working across the Redcliffe peninsula and Moreton Bay. Call 0432 304 126.

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

We handle downlight installation across Redcliffe and the peninsula: new downlights in a room that has none, replacements for ones that have failed, halogen to LED swaps, and IC-rated fittings for insulated ceilings. Andrew has 16 years on the tools and holds electrical contractor licence 91921.

You get a free quote before we start, with the layout agreed up front. We tell you how many lights the room needs, where they go and what they will do to the ceiling before any hole is cut.

What's included

  • New downlights in rooms that have none, with a planned layout
  • Replacement of failed or flickering downlights
  • Halogen to LED swaps, including removal of old transformers
  • IC-rated fittings so insulation can sit over the top
  • Dimmable circuits with a dimmer that suits the LED
  • Colour temperature matched across each room
  • Weather-rated downlights for covered outdoor ceilings and eaves
  • Testing of every circuit and a clean-up before we leave

New downlights, replacements and halogen to LED

Most downlight jobs fall into three groups. A new set of downlights in a room that has only a single ceiling light. A replacement when one fitting has died, or when the whole set is flickering. And the swap from old halogen downlights to LED, which is the one we do most. The old fitting and its transformer come out, and a new LED downlight with a matched driver goes in. In most cases it fits the existing hole.

Changing the lights in a ceiling is electrical work, and in Queensland it has to be done by a licensed electrician.

Layout planning: how many and where

A bad downlight layout is easy to spot. Dark corners, glare over the bench, shadows on the face when you stand at the mirror. We plan the layout before we cut anything. The number depends on the room size, the ceiling height, the brightness of the fitting and what the room is used for. A kitchen wants more than a bedroom. We mark the positions on the ceiling, check what is above it (joists, ducting, cables) and agree it with you.

We also look at the switching. Putting a room on two or three circuits means you can have the bench lights on without lighting the whole space. Our guide on how many downlights you need goes through the maths.

IC-rated downlights for insulated ceilings

Insulation can only sit over a downlight if the fitting is rated for it. That is what IC-rated means: insulation contact. Old halogen downlights and their transformers get very hot, and insulation on or too close to them is a known cause of roof fires. If your ceiling has halogens and insulation, we can check it and swap to IC-rated LED fittings, which lets the insulation go back over the top.

Read more in our guide to downlights in insulated ceilings, and for other lights, see lighting installation.

What affects the quote

The quote depends on the number of downlights, whether they are replacing existing fittings or going in new, and how hard the ceiling is to get into. A swap into existing holes is the simplest. New lights in a finished ceiling need cables run and holes cut, and a ceiling with limited access takes longer. Switching changes and dimmers add to the job as well.

We give a free fixed quote before we start. If you want to add downlights as part of a bigger job, we can fit it into a renovation.

Why Fins Up

You deal with Andrew direct. He has 16 years on the tools, carries licence 91921 and public liability insurance, and he is open 24 hours Monday to Saturday. We cover homes and businesses up to 60 km from Scarborough. We check the roof space or ceiling first, tell you what we find and give you a fixed price.

Need downlight installation? Ring us.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Can I put insulation over my new downlights?

Only if they are IC-rated. We fit IC-rated LED downlights so insulation can sit over them, and we check what rating your existing fittings carry.

Do I need to replace the whole fitting when I go from halogen to LED?

In most cases, yes. We remove the old fitting and transformer and fit an LED downlight with its own driver. That fixes flicker and heat and usually fits the same hole.

How many downlights does my room need?

It depends on the room size, ceiling height and use. We plan the layout and mark positions on the ceiling with you before we cut anything.

Can you do downlights on a dimmer?

Yes. We match the dimmer to the LED fitting so it does not flicker or buzz.