Blog

How many downlights do I need?

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

The number of downlights depends on the size of the room, the ceiling height, how bright each light is, and what you do in the room. A common starting point on a standard ceiling is to space downlights roughly as far apart as the ceiling is high, and about half that distance in from the walls. Kitchens and work areas need more light than bedrooms and lounges, so they get more.

What’s the simplest way to work out downlight spacing?

Use the ceiling height as your guide. On a typical ceiling, lights set roughly a ceiling height apart give an even spread. Then keep the outer row in from the walls by about half that, so you don’t get bright patches on the wall and dark patches in the middle of the room.

Draw the room on paper, mark a grid at that spacing, and count the dots. That’s your rough number. Then adjust for the things below. Most rooms end up as a neat grid of two, three or four rows.

Does the type of downlight change how many I need?

Yes, a lot. Two things matter:

  • Brightness (lumens). A brighter downlight covers more floor. Fewer bright lights can do the same job as more dim ones, though too few can feel patchy.
  • Beam angle. A wide beam spreads light across the room. A narrow beam throws a tight pool of light, good for a bench or artwork but you need more of them for general lighting.

Colour temperature doesn’t change the count, but it changes the feel. Warm white suits bedrooms and living areas. Cool white or natural white suits kitchens, laundries and garages. Some LED downlights let you switch between them.

How many downlights does each room usually need?

  • Kitchen. The most light of any room. Put lights over the bench edge so you’re not standing in your own shadow, and over the island. Pendants over an island can cover some of this.
  • Living room. Even general light, often on a dimmer. Lamps and wall lights do some of the work at night.
  • Bedroom. Usually fewer, warm white, often on a dimmer. Keep them off the line straight above where your head sits on the pillow.
  • Bathroom. Light over the vanity and the shower. Wet areas need fittings suited to the zone they’re in, which we sort out on site.
  • Hallway. A single line down the middle, spaced evenly.
  • Garage and laundry. Bright, cool light. Battens or panels can suit better than downlights here.

Do high ceilings need more downlights?

Higher ceilings push the light further, so the spacing grows but each light needs more output to reach the floor at the same brightness. Raked and very high ceilings often suit stronger lights or a mix with wall lights and pendants. We look at the room and the fittings together rather than adding more holes.

What about insulation in the ceiling?

Every downlight is a hole in your ceiling, and in most homes there’s insulation above. Recessed lights are rated for how close insulation can sit to them. IC-rated downlights are built to be covered by insulation. Others need a clear space around them. Fitting more lights than you need means more gaps in the insulation, which costs you comfort in summer. Older halogen fittings need extra care here, and we check what is above the ceiling before cutting any holes.

Should downlights be on dimmers or separate switches?

Splitting a big room onto two or three switches gives you control. Kitchen bench lights on one switch, the dining area on another. Dimmers suit living rooms and bedrooms. If you want a dimmer, the downlight and the dimmer need to be compatible, or you get flicker and buzzing. We check that before we order.

Who installs the downlights?

A licensed electrician. Installing downlights is electrical work, and in Queensland that has to be licensed. Fins Up Electrical lays out new downlights, replaces old ones and converts halogens to LED across the Redcliffe peninsula and Moreton Bay. We can look at the room, suggest a layout and give you a free fixed quote. See our downlight installation page.

Want this sorted? Downlight installation from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

How far apart should downlights be?

A common starting point is roughly the ceiling height apart, with the outer row about half that distance from the walls. Brightness and beam angle change it.

Is it better to have more downlights or brighter ones?

A balance. Too few bright lights can feel patchy and glary, too many dim ones cut more holes in the ceiling and the insulation.

Can I put downlights in a bathroom?

Yes, with fittings suited to the wet area zone they sit in. Your electrician picks the right rated fitting for each spot.

Sources

The service