If the lights flicker in one room only, the cause is local to that room. It’s usually a loose globe, an LED globe that doesn’t suit the dimmer, a failing LED driver, or a loose connection at the switch or fitting. The globe is yours to check. Anything behind the switch plate or inside the fitting is a job for a licensed electrician.
What can I check before calling anyone?
With the light switched off and the globe cool:
- Check the globe is screwed or clipped in firmly.
- Swap in a new globe of the same type and see if the flicker stops.
- Check if the flicker only happens at certain dimmer settings.
- Notice if it’s one light in the room or every light on that switch.
Changing a globe is fine. Taking off a switch plate, opening a fitting or swapping a downlight is electrical work, and in Queensland that needs a licensed electrician.
Why do LED lights flicker on a dimmer?
This is the most common cause we see. Older dimmers were built for halogen and incandescent globes. LEDs draw far less power, and an old dimmer can’t control them smoothly, so you get flicker, buzzing or lights that never fully switch off.
The fix is matching the dimmer and the globes. Sometimes that’s new dimmable LEDs. Often it’s a new LED-rated dimmer. We sort this regularly as part of halogen to LED downlight upgrades.
What else causes flicker in one room?
- A failing LED driver. Many downlights have a small driver above the ceiling. When it starts to fail, the light flickers before it dies.
- A loose connection at the switch, the fitting or a junction in the ceiling. Loose connections heat up and are a fire risk.
- A worn switch. Old switches wear inside and can arc.
- A ceiling fan on the same circuit with a fault. We’ve fixed a ceiling fan that had short-circuited the lights, and the cause was in the fan, not the lights.
When should I stop using the light?
Switch it off and leave it off if:
- you hear buzzing or crackling from the switch or fitting
- the switch plate feels warm
- you smell burning or see brown marks around the fitting
- the flicker continues with a new globe and no dimmer involved
These point to a loose or burnt connection, and that’s how electrical fires start. Switching off at the wall stops the light. If you also smell burning, switch off that lighting circuit at the switchboard if you can do it safely, and call an electrician.
Does the age of the house matter?
It does. Plenty of homes on the peninsula have had their lights changed several times over the decades. Each change adds another join in the ceiling, and some of those joins weren’t done well. Old switches, brittle cable and fittings that have baked under a hot tin roof for years all add to it.
In homes like these the cause is often a fitting or a join that has been patched more than once. Replacing the tired fittings and redoing the joins fixes it properly, instead of chasing one globe at a time. It is the same work we do when re-lighting an older home or an ex-rental.
How do we fix it?
We test the circuit, check the switch, fitting and any junctions, and find the loose or failing part. Then we quote the fix before doing anything. If the room has old halogen downlights or tired fittings, it often makes sense to replace them at the same time.
Fins Up Electrical does lighting installation and repairs across Scarborough, Redcliffe and out to Caboolture. We work 24 hours Monday to Saturday, and the quote is free.
Want this sorted? Lighting installation from Fins Up.
Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.
Common questions
Why do my new LED downlights flicker?
Most often the dimmer isn’t rated for LEDs, or the globes and dimmer don’t match. A failing driver is the next most likely cause.
Is a flickering light a fire risk?
A loose globe isn’t. A loose or burnt connection at the switch or fitting can be, so if a new globe doesn’t fix it, get it checked.
Can I replace a dimmer switch myself?
No. Replacing a switch or dimmer is electrical work, and in Queensland it must be done by a licensed electrician.
Why does only one light in the room flicker?
If one light flickers and the others on the same switch don’t, the problem is usually that globe, its driver or that fitting’s connection.