Blog

Why does my safety switch keep tripping?

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

A safety switch trips when it senses electricity leaking to earth, so a switch that keeps tripping is telling you something on that circuit is faulty. Most of the time it’s an appliance. If it still trips with everything unplugged, the fault is in the wiring, a power point or a fitting, and that needs a licensed electrician.

What does a safety switch do when it trips?

A safety switch watches the current going out on a circuit and the current coming back. If some of it goes missing, it’s leaking somewhere it shouldn’t, maybe through a damaged cord, a wet fitting or a person. The switch cuts the power within milliseconds.

That’s different from a circuit breaker. A circuit breaker protects the wiring from too much current. A safety switch protects people from electric shock. On most switchboards you can tell them apart because a safety switch has a button marked 'T' or 'Test'.

What can I safely check myself?

Queensland’s Electrical Safety Office gives homeowners a simple process for a tripping safety switch. It only involves plugs and the reset lever, never tools.

  1. Unplug every appliance on the circuit that tripped.
  2. Reset the safety switch.
  3. Plug the appliances back in and switch them on one at a time.
  4. If it trips again, the last thing you plugged in is your likely culprit. Leave it unplugged, reset, and keep going with the rest.

If you’ve got a fridge or air conditioner on that circuit, give it two to three minutes before you reset, so the compressor doesn’t get hammered.

Found the appliance? Stop using it. Get it repaired by an authorised service agent or a licensed electrician, or replace it.

What are the most common causes?

  • A faulty appliance. Kettles, toasters, washing machines, old heaters and anything with a heating element are regular offenders.
  • Water. Moisture in an outdoor power point, an outdoor light or a garden light will trip a switch, often after rain.
  • A failing hot water element. If the hot water system is on the same safety switch, a leaking element can trip it, often overnight.
  • Damaged wiring. Old cable, rodent damage in the roof, or a nail or screw driven through a cable during a renovation.
  • A worn safety switch. Less common, but they can fail.

When should I stop and call an electrician?

Call a licensed electrician if:

  • the switch trips with every appliance unplugged
  • it won’t reset at all
  • you smell burning, see scorch marks, or hear buzzing from a power point or the switchboard
  • anyone has felt a tingle or shock

The Electrical Safety Office is clear that a switch that won’t reset may mean a fault on the circuit, and it needs a licensed electrician to inspect and repair it. Don’t keep flicking it back on. Every reset puts power back into a fault the switch is trying to protect you from.

How does an electrician find the fault?

We isolate the circuit, then test it section by section with proper test gear until the leak shows up. Sometimes it’s a single outdoor point full of water. Sometimes it’s a cable that’s been chewed in the roof. Once we know, we tell you what we found and what the fix is before we do it.

At Fins Up Electrical, Andrew does this kind of fault finding and repair across the Redcliffe peninsula and Moreton Bay. We’re open 24 hours Monday to Saturday, the quote is free, and you get it before any work starts.

Should I have more than one safety switch?

Older Queensland homes often have one safety switch covering only the power points. The Electrical Safety Office recommends safety switches on every circuit, including lights, air conditioning, the oven, hot water and pool equipment. If your nuisance tripping turns up an old board with a single switch, it’s worth asking about a switchboard upgrade while we’re there.

Want this sorted? Electrical repairs from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Can I just keep resetting my safety switch?

No. If it trips again straight away, there’s a fault it’s protecting you from. Unplug everything on the circuit and work through the appliances, and if it still trips, call a licensed electrician.

How often should I test my safety switch?

The Electrical Safety Office recommends pressing the 'T' or 'Test' button every three months. If it doesn’t switch off, get a licensed electrician to check it.

Is a tripping safety switch dangerous?

The switch tripping is the safe part, it’s doing its job. The fault behind it is the danger, so don’t ignore it or bypass it.

Can I replace a safety switch myself?

No. In Queensland only a licensed electrician can install or replace a safety switch. DIY electrical work is illegal.

Sources

The service