Blog

What causes electrical faults in a house

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

Most electrical faults in a house come from a loose connection, a worn appliance, water getting where it shouldn’t, ageing wiring, or a circuit carrying more than it was built for. The fault usually shows up as a tripping safety switch, a dead power point, flickering lights or a warm switch, and a licensed electrician traces it back to the part that failed.

What are the most common causes?

Roughly in the order we find them on the Redcliffe peninsula:

  • Loose connections. Terminals in power points, switches and light fittings work loose over the years. A loose terminal heats up.
  • A faulty appliance. A kettle, fridge or washing machine with a worn element or damaged lead will trip a safety switch every time it runs.
  • Moisture. Rain into an outdoor point, a leaking roof over a light, or salty damp air working into fittings near the water.
  • Old wiring. Rubber and early plastic insulation goes brittle and cracks.
  • Overloaded circuits. Too many heavy appliances on one circuit, or a power board feeding another power board.
  • Damage. A screw through a cable during a reno, or rodents chewing wiring in the roof.

How do I know which one I’ve got?

The symptom narrows it down. A safety switch that trips when one appliance runs points at that appliance. Lights that flicker across the whole house point at the supply or the main connection. One dead power point with a scorch mark points at a loose terminal behind it.

If you want to read more on a single symptom, see a safety switch that keeps tripping or a power point that’s stopped working.

Does the weather cause electrical faults?

Yes, often. Storms push water into outdoor points, eaves lights and meter boxes, and a safety switch that only trips when it rains is a classic sign. Homes close to the bay at Scarborough, Woody Point and Clontarf also get salt in the air. Over years that corrodes outdoor fittings and terminals faster than it would inland.

Can an old house have more faults?

An older house has had more years for terminals to loosen and insulation to age, and it was wired for far fewer appliances. Plenty of older Redcliffe homes still run on boards with ceramic fuses and no safety switch at all. That doesn’t make every old home faulty. It does mean a fault there has less protection between it and you.

What should I do when I find a fault?

Unplug whatever was running when it happened. If a safety switch tripped, try resetting it once. If it trips again, leave it off and call an electrician. Smoke, a burning smell, sparks or a tingle from a tap or appliance are urgent, so stay clear and call straight away.

Don’t open up power points, switches or the switchboard yourself. In Queensland that is electrical work, and it has to be done by a licensed electrician.

Who finds and fixes electrical faults near me?

Fins Up Electrical does fault finding across the Redcliffe peninsula and Moreton Bay. Andrew tests the circuits, finds the failed part and gives you a free fixed quote to repair it before any work starts. We’re open 24 hours Monday to Saturday, licence 91921. See our electrical repairs page.

Want this sorted? Electrical repairs from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

What is the most common electrical fault in a home?

A faulty appliance tripping the safety switch is the one we see most, followed by loose connections in power points and light fittings.

Can an electrical fault fix itself?

A fault can stop showing for a while, especially one caused by moisture that dries out. The cause is still there, and it usually comes back.

Is it safe to keep resetting the safety switch?

Once is fine. If it trips again, something is leaking current, so leave it off and get the circuit tested.

Sources

The service